| |
| Asbestos
Packing |
| OIL,
SOLVENTS, ACIDS, ALKALIES AND CHEMICALS |
| |
|
Style
No. "SPITMAAN" |
Temperature
(Centigrade) |
Service
Recommendation |
| 1500
SOLVA |
4250 |
Asbestos
packing manufactured from high grade asbestos
yarn impregnated with oil resisting synthetic
compound by a controlled process during which
each strand is treated with fine graphite and
a special grade of lubricant suited for hot and
cold oils, solvents, aromatic hydrocarbons, petroleum
distillates and oil refinery services.Please specify
when the rod or shaft is STAINLESS STEEL |
| |
|
|
|
1513 |
5000 |
Asbestos-reinforced
brass wire packing treated with oil resisting
synthetic compound having suitable lubricant.
Incorporation of brass wire improves strength
an~ anti-friction properties. Best suited for
petrochemical applications under high pressure
conditions. Please indicate specifically when
the rod is STAINLESS STEEL |
| |
|
|
|
1490 |
3000 |
Special
grade of asbestos DUPLEX BRAIDED packing suitably
lubricated and treated with graphite to withstand
caustic liquors, including caustic potash, soda,
lime, ammonia and sulphides. An ideal packing
for paper mill applications.
PH 4 - 12 |
| |
|
|
|
1094 |
-1500
to
+3000 |
High
grade asbestos fibre yarn DUPLEX BRAIDED packing
impregnated with special PTFE suspensoid for severe
caustic and other corrosive chemical, solvents,
oils and petroleum byproducts and oxygen service.
PH 2 - 12. |
| |
|
|
|
1603 |
-1500
to
+3000 |
A
combination packing with specially selected fluoropolymer
PTFE fibre and chemical resistant inorganic fibre
yarn for resisting against corrosive medium and
concentrated acids. This construction improves
the strength and chemical inertness of the packing.
This combination packing is further treated with
PTFE suspensoid. This packing can be used against
acids, chlorine, in valves, pumps having chrome
plated or stainless steel shafts. PH 2 - 14. |
| |
|
|
|
1003 |
-1500
to
+3000 |
A
combination packing concentrically braided with
special compound to resist hot concentrated alkalies,
organic and dilute acids. A very special low friction
packing recommended to be used with high speed
pumps, agitator shafts, oils, solvents, ammonia
solution, concentrated caustics and ketones. PH
2 - 12. |
| |
|
|
|
1 |
-2000
to
+2900 |
A
combination packing concentrically braided with
special compound to resist hot concentrated alkalies,
organic and dilute acids. A very special low friction
packing recommended to be used with high speed
pumps, agitator shafts, oils, solvents, ammonia
solution, concentrated caustics and ketones. PH
2 - 12. |
| |
|
|
|
2 |
-2000
to
+2900 |
A
100% pure PTFE packing impregnated with a special
chemically inert suspensoid. A good packing for
control valves, pumps handling corrosive gases,
ammonia, foodsuffs and pharmaceuticals. It is
an ideal packing for sealing dryers, mixers and
agitators. Due to high tensile strength of the
fibre, this packing is best suited to be used
in high pressure valves and reciprocating pump
applications. PH 0 - 14. |
| |
|
|
|
3 |
-2000
to
+2900 |
A
PTFE fibrous packing having special DUPLEX BRAID
to increase dimensional stability treated with
inert high temperature lubricant. This packing
is safe, non-toxic and flexible for use on pumps,
for concentrated acids, alkalies, oils, solvents
and gases. PH 0 - 14 |
| |
|
|
|
23 |
-2500
to
+3000 |
A
PUPLEX plaited flexible combination packing having
super grade fluoropolymer intimately treated with
graphite to enhance lubricity and heat dissipation.
This packing is self lubricating mechanically
strong and widely used in chemicals, petrochemicals,
power plants, paper, pulp and food industries.
PH 0 - 14. |
| |
|
|
|
36 |
-2400
to
+3000 |
A
graphite bonded fluoropolymer fibre packing DUPLEX
BRAIDED to improve thermal conductivity and lubricity
for maintaining extremely low friction, chemical
resistance and reduces maintenance cost. Best
suited to valve stems, centrifugal pumps, wood
pulp, caustics, oils, solvents, acids and strong
chemicals. This packing is widely used in Refineries,
Petrochemicals and Fertilizer Industries. PH 0
- 14. |
| |
|
|
| 2222 |
1300 |
This
is a specially developed lubricated non-graphited
long vegetable fibre braided packing for marine
applications. It has been further lubricated with
a low friction dry lubricant to enhance anti-friction
property for use in sea water and fresh or river
water applications, water wheel shafts or rudder
and stern glands. |
| |
|
|
| 2224 |
1500 |
The
most critical parts to seal in a ship are the stern
tubes and the rudder post. With this view in mind,
a most reliable packing is specially developed from
non-asbestos tough vegetable fibres. The packing
is impregnated with lubricants which protect the
packing structure. This packing is therefore most
suited for use in marine against sea water in rudder
posts and stern tubes, oils, weak alkali solutions
and in paper plants. |
| |
|
|
| 2300 |
1300 |
This
packing is manufactured from high tensile strength
vegetable fibre thoroughly impregnated with a special
lubricant and graphite. Suitable for fresh and salt
water, pen-stock and heavy duty hydraulic applications |
|
376 |
1300 |
A
special non-graphited soft natural fibre yarn packing
impregnated with first grade lubricant suitable
for high speed centrifugal pumps, compressors and
refrigerations,D M Water, cooling water and condensate
pumps. Owing to the pliable nature of the material
used this packing permits free motion of the rod. |
| |
|
|
| 174 |
-200°
to
+3000 |
A
most advanced technology packing. A special DUPLEX
BRAIDED construction made from synthetic aramid
fibre as strong as steel and most flexible. Safely
recommended for pumping granular and viscous fluids,
even under high pressure condition. This packing
is suitable for solvents, abrasive slurries, fuel
oil, high pressure dozing pumps, mild acids and
alkalies. A most effective packing for refinery,
high pressure water injection system and as an anti-extrusion
packing. PH 3 - 12. |
| |
|
|
| 172 |
-200°
to
+2800 |
This
is a cross braided combination packing having pure
PTFE fibre with special high pressure resistant
fibre filament yarn incorporated in it. This packing
is most suitable to all fluids and corrosive chemicals.
It has exceptionally good dimensional stability,
creep resistance and is non-toxic. Recommended for.
dairies, food and pharmaceutical industries, refineries
and fertilizer plants. This packing can withstand
high pressure conditons in both rotary and reciprocating
applications. PH 2 - 12. |
| |
|
|
| 176 |
-200°
to
+3000 |
A
high quality combination packing incorporated with
graphite/PTFE fibres and special synthetic fibre
to give additional reinforcement of sliding surface
and heat dissipation property. It is most suited
in centrifugal and reciprocating pumps with high
pressure and sliding velocity for abrasive media.
It resists hot water, oil, gases, greases, liquid
ammonia and carbamate solution under high pressure
conditions. PH 3 - 12.. |
|
|
| |
|
